Itema sells and services a full line of state-of-the-art sampling machines from CCI Tech Inc.
The Evergreen Rapier Machine
The CCI Evergreen Rapier Machine is a multi-functional machine producing a variety of woven samples, including industrial fabrics, upholstery, and apparel. The Evergreen Rapier Machine caters to every detail in sampling, delivering smooth performance at high-speeds with increased efficiency.
Technical Information
| Model | Evergreen |
| Weaving Width | 20 inches (508mm) maximum |
| Speed | 75 ppm maximum (with reference to fabric width of 20 inches) / 85 ppm maximum (with reference to fabric width of 10 inches) |
| Controller | PC Based-Industrial PC / Windows Embedded operating system |
| Weft Selector | 8 colors electronic weft selection device |
| Fabric Take-up |
Electronically controlled. Weft density can be changed freely within the same weave. |
| Warp Let-off | Positive electronically controlled. Digital display of warp tension. Optional second beam assembly available. |
| Shedding | Computerized controller. 20 heald frames driven pneumatically by air cylinders (1st & 2nd heald frames are for leno and selvedges). Optional up to maximum 24 heald frames. |
| Drawing-In | Heddle frames can be separated from the loom for heddles and reeds drawing-in |
| Beat-up | Computer controlled driven independently by servo-motor. Suitable for heavy fabrics. Positions and quantity of beat up could be adjusted. |
| Weft Insertion | Single rapier weft insertion driven by servo-motor . Speed could be controlled independently through the computer. Insertion can be adjusted for 10 or 20 inches. |
| Weft Breaks | Equipped with weft-break detecting device. Loom stops when weft breaks. |
| Warp Breaks | Optional warp stop device is available |
| Design | Built-in SEdit2 design and editing software. It could be installed separately on other PC for design works. |
| Air Consumption | 880L/min. Air pressure 6-9 kgf/cm2 |
| Power | 220V Single phase, 50-60Hz |
The Studio Rapier Machine
The CCI Studio Rapier Machine features a fully automatic loom and simple operational system. The Studio Rapier Machine is suitable for a large range of yarn, providing improved weaving capabilities. With this machine, weavers can expect a new experience in sampling with increased efficiency.
Technical Information
| Model | The Studio |
| Weaving Width | 8-17 inches (203mm-432mm) |
| Speed | 150ppm maximum |
| Weft Selector | 12 colors electronic weft selection device |
| Fabric Take-up | Electronically controlled. Weft density can be changed freely within the same weave. |
| Warp Let-off | Positive electronically controlled. Warp tension could be displayed and set through the computer. |
| Shedding | Computerized controlled. Maximum 24 heddle frames driven by servo-motor. Adjustable Shedding. |
| Draw-in | Heddle frames can be separated from the loom for heddles and reeds draw-in |
| Weft Insertion | Single rapier weft insertion driven by servo-motor. Speed could be controlled independently through the computer. |
| Beat-up | Computerized servo-motor controlled. Beat-up could be achieved in different positions. |
| Weft Breaks | Electronic weft-break detecting device. Loom stops when weft breaks. |
| Warp Breaks | Warp-break detecting device. Loom stops when warp breaks (Optional). |
| Designing | Built-in SEdit2 design and editing software. It could also be installed separately on other PC for design works. |
| Power | 220V, 50-60Hz |
| Controller | PC Based-Industrial PC / Windows Embedded operating system / Solid-State Drive (SSD） |
SW550 Mini Warper
The CCI SW550 Mini Warper was designed for the sampling loom. The machine can produce warp beams for short run featuring fixed lengths and different colors to work with SL8900 Evergreen. It uses a computerized independent PC based controller featuring built-in design editing software for easier operation.
The SW550 Mini Warper uses a computerized yarn-guiding device as well. With this feature, the warp is placed precisely across the width of the warper to guarantee that it is wound correctly in position on the drum. The SW550 Mini Warper also features color change notification to avoid unnecessary mistakes. The machine automatically stops once each color of warp on the beam is finished.
With the SW550 Mini Warper, the tension and speed are adjustable during warping to provide the best quality of warp beams.
Technical Information
| Model | SW550 |
| Working Width | 20 inches (508 mm) maximum |
| Warping Length | 3.6 m |
| Color Change | Shifting movements controlled by computer. Color changed manually through alerts from computer. |
| Yam Breaks | Equipped with yarn-break detecting device, machine stops when yarn breaks |
| Designing | Built-in SEdit2 design and editing software. It could also be installed separately on other PC for design works. |
| Air Consumption | 10L/min. Air pressure 6-9 Kgf/cm2 |
| Power | 220V Single phase, 50-60Hz |
| Controller | PC Based-Industrial PC / Windows Embedded operating system |
MINI LUTAN Single-end Warping Machine
The CCI Mini Lutan is a convenient and all-inclusive warping tool to assist with the sampling loom. It uses the patented Ring Warping method can is capable of preparing beams of 7.5 to 30 meters without limitation to the number of bobbins, types of warp yarn, or the warp arrangement. With all of these features, the Mini Lutan is the ideal warping machine for sampling.
Technical Information
| Model | LUTAN v2.5 (Mini Lutan) |
| Weaving Width | 20 inches (508mm) |
| Warping Length |
7.5 - 30 m |
| Warping Speed | 400 m/min maximum (Dependent on warp materials used) |
| Drum Circumference | 2.5 m |
| Stationary Creel | Up to 8 colors maximum. Computerized automatic color change. Equipped with 8 accumulators. |
| Beaming Unit | Integrated beaming unit. The warp tension and beaming speed are adjustable. |
| Leasing Device | Equipped with 5 leasing rods and 2 leases maximum |
| Warp Arrangement | Built-in SEdit2 design software |
| Controller | PC Based-Industrial PC / Windows Embedded operating system |
| Power | 220V, 50-60Hz, 5-9 kgf/cm² compressed air |
SS565 Single-end Sizing Machine
The CCI SS565 Single End Sizing Machine was developed to meet the demand of small quantity sizing. To achieve high quality sizing, the machine features minimum quantity of size and simple electrical heating. The SS565 Single End Sizing Machine delivers speed and simplicity to meet key sampling requirements.
Technical Information
| Model | SS565 |
| Sizing Tank | Electrical-heating with electronic controls. Tank is detachable for cleaning. |
| Yarn Breaks | Equipped with yarn-break detecting device, machine stops when yarn breaks |
| Drying | Electronically controlled. Electrically-heated drying through hot air. |
| Power | 220V Single phase, 50~60Hz |
Lutan Single-end Warping Machine
The CCI Lutan Single-end Warping Machine has a unique design featuring a "Ring" warping. This new warping technique provides the best quality warp beams. For added versatility, the Lutan offers two drum sizes and three types of creel of different designs.
With its Ring design, the Lutan Single-end Warping Machine is capable of high speed running for extended periods. Different servo-motors control the rotating and traversing movements while the speed and positions are controlled by computer. The leasing hooks are pneumatically driven and are detachable to allow for easy operation and to avoid damage on warp. These features help to improve the overall quality of the warp beam.
Technical Information
| Model | Lutan v3.6 | Lutan v5.0 |
| Working Width | 2,200 mm | |
| Warping Length | 11-200 m (Dependent on warp materials used) | 15-500 m (Dependent on warp materials used |
| Warping Speed |
Stationary Creel
- 600 m/min maximum Rotatory / Super Creel - 7,200 m/min maximum (Dependent on warp materials used) |
12,000 or 16,000 m/min maximum (Dependent on warp materials used) |
| Drum Circumference | 3.6 m | 5 m |
| Beaming Unit | Lifting and traversing speeds are adjustable and electrically controlled | |
| Leasing Device | Equipped with 5 leasing rods with detachable leasing hooks | Equipped with 8 leasing rods with detachable leasing hooks |
| Warp Arrangement | Built-in SEdit2 design software | |
| Controller | PC Based-Industrial PC / Windows Embedded operating system | |
| Power | 220V or 380V 50-60Hz, 3 phase, 5-9 kgf/cm2 compressed air | |
